3 x 15 (6 Lug) Front Wheel

• For use with 4.00 x 15" or 5.50 x 15" tires
• 3" wide (bead to bead) x 15" diameter (bead to bead)
• 6 lug bolt hole.
• 4-5/8" inside diameter pilot
• 3" center to center lug bolts
• 3.25" backspacing
• Off-White powder coat paint

• To determine backspacing, lay the wheel flat on the ground with the back of the wheel facing up. Next, lay a straightedge across the wheel and measure the distance from the backside of the mounting surface to the straightedge.
• To determine the width of rim, measure on the inside from bead to bead, not outside to outside.
• If you are only ordering 1 rim, then please measure the old rim BEFORE ordering, as other sizes could have been installed on your tractor at one time.
• Use with new lug bolts / nuts.
• Not designed for tubeless applications.
• Also used as a light weight rim for antique pulling tractors.

Fits JD 

B Serviceable, but will have a different offset from the original John Deere B, using 3" x 15" rim
M SN: 43251 & up, using 3" x 15" rim
MT Some, using 3" x 15" rim
320 Some, using 3" x 15" rim
330 Some, using 3" x 15" rim
40 Some, using 3" x 15" rim
420 Some, using 3" x 15" rim
430 Some, using 3" x 15" rim
1010 Some, using 3" x 15" rim

Replaces JD3000, JD3000T