Intake and Exhaust Manifold with Heat Exchanger, Assembled

• If you need to adjust the pendulum (IHS965) on the intake manifold, please use a Torx T8 screwdriver or bit.
• We suggest you loosen the four bolts holding the two pieces together slightly before bolting this up to head and once tight to head then tighten the four bolts holding the two halves together
• 2-1/2" NPT threaded pipe outlet
• This completely assembled 2-piece intake and exhaust manifold is easier to install! Our IHS963 2-piece manifold with heat spring eliminates the need to match the flanges of a used manifold to half of a new manifold.
• Please order IHS1621 exhaust pipe unless you have a 460, 560, 606,660, 2606 or 3616.
  
  If you have a 460, 560, 606, 660, 2606 or 3616, then you need an exhaust adapter. Please view: IHS1236 adapter. This adapter offsets the exhaust hole to align with the hood of the tractor and also steps down the pipe diameter to 2" NPT. These tractors use IHS1619 exhaust pipe.
  
  If you have a 656 or 2656, then you can use the IHS1621 exhaust pipe, however the exhaust pipe is not perfectly centered on the exhaust hole in the hood. Also, you need to have the inlet pipe on the muffler expanded to accommodate this larger diameter pipe or you need to purchase IHS1772 muffler and ABC585 muffler clamp.

Combines 

Industrial

Misc