Buy John Deer Parts Online

1 - 24 of 297 items
1 2 3 ... 13 » View All

1/2" Alternator Pulley For ABC418

1/2" Alternator Pulley For ABC418

All tractors with ABC418 alternator needing 1/2" pulley.--.670" shaft dia., 3-3/16" pulley O.D., round hole, not keyed), .500" Belt Groove NOTE: This is not suitable for conversion on JD Dubuque Series tractors: M, MT, MC, 40, 320, 330, 420, 430....

  • Price: $19.95

12-volt Distributor Coil (Metal Housing)

12-volt Distributor Coil (Metal Housing)

AC Combines - Fits: [ A, AII, C, CII, E, EII, EIII, F, F2, G, K, K2 (And Others Using A 12 Volt Distributor System) ] AC Miscellaneous - Fits: [ Cotton picker: 616, 622, 801, 802 (And Others Using A 12 Volt Distributor System) ], [ Forklift:...

  • Price: $19.95

Alternator Pulley only

Alternator Pulley only

Fits the same applications as STP part number ABC418 alternator 0.670" shaft diameter Round hole, not keyed 2-1/2" pulley O.D. 5/8" belt width

  • Price: $21.00

Blank Generator Tag For Autolite

Blank Generator Tag For Autolite

Includes 2 rivets --- Black anodized aluminum --- 2.300 O/A Length, .732 Wide 2" C-C rivet holes, .145 Dia rivet hole --- Customer must stamp numbers

  • Price: $14.45

Blank Starter / Generator Tag For 12-V Delco Remy With 2 Rivets

Blank Starter / Generator Tag For 12-V Delco Remy With 2 Rivets

(For Delco Remy Distributor) Fits: Tractors & Industrial Notes: Customer must stamp numbers. Specifications: 2.5" o/a length, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes w/ raised letters

  • Price: $14.45

Blank Starter Tag For Autolite (2 Rivets Included)

Blank Starter Tag For Autolite (2 Rivets Included)

Customer must stamp the numbers. This starter tag is black anodized aluminum. This starter tag measures 2.955" O/A length, 0.915" Wide with 0.140" rivet holes. The measurement from the center to center of the rivet holes is 2.650".

  • Price: $14.45

Clutch Throw Out Bearing (IH Torque Amplifier Release Bearing)

Clutch Throw Out Bearing (IH Torque Amplifier Release Bearing)

AC Combines - Fits: Combine: A, AII, C, CII, F, F2, F3, G, L (Up to SN: 4316), L3, M, M2, M3 AC Miscellaneous - Fits: Motor Grader: D (Sn: 5425 & Up) Allis Chalmers - Fits: [ B, C, CA (With 8 1/2" or 9" Clutch) ], D14, D15, D17, D19, ED40,...

  • Price: $19.95

Delco Distributor Terminal Insulator (Square Shoulder)

Delco Distributor Terminal Insulator (Square Shoulder)

AC Combines - Fits: [ A, AII, C, CII, E, EIII (W/ Delco Distributor & Clip Held Cap) ], F (To Eng Sn: 53073, W/ Delco 1112461, 1112601, 1112655 Distributor & Clip Held Cap), [ 60, 60A, 66, 72, 90 (Some using Delco 1111411 vertical...

  • Price: $14.99

Delco Distributor Terminal Insulator Assembly (Round Shoulder)

Delco Distributor Terminal Insulator Assembly (Round Shoulder)

Allis Chalmers - Fits: G; Replaces: 1847646 , 1847647 , 1878405 Avery - Fits: Avery: A, BF, BG, R, V Case - Fits: [ SOME: D, DC, DC-3, DC-4, DCS, DEX, DH, DI, DI/NAR, DO, DO-VS, DO/STD, DOEX, DV, S, SC, SC-3, SC-4, SI, SO (using Delco 1111411...

  • Price: $14.95

Distributor Tag w/ (2) Rivets (For Delco Remy Distributor)

Distributor Tag w/ (2) Rivets (For Delco Remy Distributor)

Fits: Tractors & Industrial Notes: Stamped w/ raised letters. Customer must stamp numbers. Anodized black Stamped with raised letters 2-1/2" Overall length 0.800" Tall 2" Center-to-center rivet holes (2) 0.150" Diameter rivet holes Includes rivets Customer must stamp numbers

  • Price: $14.45

Economy Carburetor Repair Kit (For Marvel Schebler carburetors)

Economy Carburetor Repair Kit (For Marvel Schebler carburetors)

AC Miscellaneous - Fits: Some: D (Grader) Allis Chalmers - Fits: Some: 170, 175, 180, 185, D15 (SN: 9001 & Up), D17, H3 (SN: 6960 & Up), WD45; Replaces: 226258 , 226275 , 231431 , 236568 , 237860 , 239961 , 1122922 , 4022815 Case - Fits:...

  • Price: $22.95

Economy Char-Lynn Power Steering Slip Fit Coupler

Economy Char-Lynn Power Steering Slip Fit Coupler

Fits BTP part number IHS555---Use only if you have a universal joint at one end of existing steering shaft -- 2-5/8" overall length.

  • Price: $18.25

Exhaust Manifold Gasket Material

Exhaust Manifold Gasket Material

Perforated steel core, used to make manifold gaskets -- 1/16" thick x 12" wide x 28-1/2" long

  • Price: $19.00

In Line Fuel Filter w/ Hose & Clamps

In Line Fuel Filter w/ Hose & Clamps

Fits models using 3/8" fuel lines --- Must splice fuel line to use --- Includes hose and clamps --- Use to help keep rust and dirt out of the carburetor

  • Price: $6.45

Magneto Push-Pull Ignition Switch

Magneto Push-Pull Ignition Switch

Allis Chalmers - Fits various models; Replaces: 213140 , 70213140 Case - Fits various models Ford - Fits various models International / Farmall - Fits: A, AV, B, BN, C, Cub (-----(WILL NOT FIT 154, 184, 185)-----), H, HV, I4, I6, M, MD, MV, O4,...

  • Price: $17.00

Original Spring Style Starter Drive (Bendix)

Original Spring Style Starter Drive (Bendix)

Allis Chalmers - Fits: [ D14, WC, WD, WD45 (With starters numbers: 1107017, 1107951, 1107474, 1107466, 1107962) ], G (with starter numbers: 1109605 1109614), [ Early: D10, D12 (With starters numbers: 1107017, 1107951, 1107474, 1107466, 1107962)...

  • Price: $39.50

Pre-Cleaner Cap Assembly (Includes 10 1/2" Bowl)

Pre-Cleaner Cap Assembly (Includes 10 1/2" Bowl)

Allis Chalmers - Fits: D21, [ 190, 190XT (Diesel) ], 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050; Replaces: 249775 , 1281952 , 1306484 , 70249775 Case - Fits various models Cockshutt - Fits various models Ford - Fits various models...

  • Price: $64.60

Pre-Cleaner Cap Assembly 7" bowl

Pre-Cleaner Cap Assembly 7" bowl

Allis Chalmers - Fits various models Case - Fits: W10, W7, W8, 1030, 1030 Comfort King, 1030 Draft-O-Matic, 1031, 1032, 1845 (Diesel), 350B, 450B, 450C, 480B, 480C, 480D, 480LL, 580B, 580C, 584D, 585C, 585D, 586C, 586D, 600, 680CK, 730 (Diesel...

  • Price: $74.95

Rotor Button (For Delco Distributors w/ clip held cap)

Rotor Button (For Delco Distributors w/ clip held cap)

AC Combines - Fits: [ A, AII, C, CII, E, EIII (W/ Delco Distributor & Clip Held Cap) ], B (Using 230 C.I. BUDA, W/ Delco Distributor & Clip Held Cap), F (To Eng Sn: 53073, W/ Delco 1112461, 1112601, 1112655 Distributor & Clip Held...

  • Price: $3.95

Sediment Bowl Assembly

Sediment Bowl Assembly

Fits John Deere - L, LA, LI, [ LUC, LUS, LUW (Power Unit) ]; Replaces: AL2087T Massey Harris - Fits: Pacer (16), Pony (sn 3117 and up); Replaces: 850839M1 , 852241M1 1/8" pipe thread (both ends) for components use ABC123 bowl, ABC039 gasket,...

  • Price: $59.95

Small Pre-Cleaner Bowl (Clear Plastic)

Small Pre-Cleaner Bowl (Clear Plastic)

Allis Chalmers - Fits: D15 (Diesel Up to SN: 9001), I60, Backhoe: I600 (Diesel), Crawler: HD3; Replaces: 233663 , 70233662 Case - Fits: 310, [ 430, 430CK, 431, 470, 480, 480CK (Diesel) ], [ 530, 540, 541, 570, 580, 580CK, 580 Construction King,...

  • Price: $24.95

Spring Clip And Longer Bracket For Delco Distributor Cap

Spring Clip And Longer Bracket For Delco Distributor Cap

AC Combines - Fits: [ A, AII, C, CII, E, EIII (W/ Delco Distributor & Clip Held Cap) ], B (Using 230 C.I. BUDA, W/ Delco Distributor & Clip Held Cap), F (To Eng Sn: 53073, W/ Delco 1112461, 1112601, 1112655 Distributor & Clip Held...

  • Price: $14.95

Spring Clip And Shorter Bracket: Delco Distributor

Spring Clip And Shorter Bracket: Delco Distributor

AC Combines - Fits: [ A, AII, C, CII, E, EIII (W/ Delco Distributor & Clip Held Cap) ], B (Using 230 C.I. BUDA, W/ Delco Distributor & Clip Held Cap), F (To Eng Sn: 53073, W/ Delco 1112461, 1112601, 1112655 Distributor & Clip Held...

  • Price: $14.95

Starter Drive Spring only

Starter Drive Spring only

Allis Chalmers - Fits: [ B, C, CA, IB (With starter # 1107043, 1107046, 1107096) ], [ D14, WC, WD, WF (With starter # 1107951, 1107017, 1107466, 1107474, 1107962) ], G (With starter # 1109605, 1109614), WD45 (Gas, With starter # 1107951, 1107017,...

  • Price: $23.95
1 - 24 of 297 items
1 2 3 ... 13 » View All